User's Manual

5. RX supports switching between normal mode and enhanced anti-

interference mode according to transmission distance and interference level

LED Digits Display

Transmitter

Power Indicator

Video Indicator

TX : SDI Audio Input

Mode Indicator

LED Digits Display description

LED Digits Display Status

LED Digits Display: Channel 1 ~ 9, A(10), b(11)

Video Indicator: Red: HDMI input; Yellow: SDI input

Power Indicator: Illuminate in working mode

SDI Audio Input Mode Indicator:

Decimal point light is off: SDI Audio Input Mode 0

Decimal point light is on: SDI Audio Input Mode 1

a) Switch from normal mode to enhanced anti-interference mode: long press

“OK” for longer than 3 seconds to enter enhanced anti-interference mode,

and decimal point of digital tube (indicator) starts to flash slowly.

b) Switch from enhanced anti-interference mode to normal mode: long press

“OK” for longer than 3 seconds to enter normal mode, and decimal point

of the digital tube(indicator) goes out

c) Normal mode is default setting, supporting memory function,

so RX will enter last mode after reboot.

(Normal mode is recommended for long-distance transmission scenario;

enhanced anti-interference mode is recommended for short-distance

transmission and strong interference scenario)

RX : Normal/Enhanced

Anti-interference

Mode Indicator