User's Manual

11 12

D C

DC IN

7V-36V

H D M I

S D I

SDI monitor

SDI OUT

HDMI OUT

Receiver Installation Steps:

1. Fix the antennas and adjust their angles as shown in the figure below.

2. Connect RX with the monitor via corresponding power cable and HD

video cables as shown in the figure below.

12V power adapter

Li-battery

3. Turn on the power switch to start power supplying.

Power Switch: ON turn on

OFF turn off

4. Press “CH” button to select the corresponding working channel of receiver and

then press “OK” button for confirmation.The LED digits display will display one of

the characters from 1 ~ 9, A and b when the video signal of device is normal;

the monitor will display the image from camera simultaneously.

Notice:

please rotate the

golden mental

part of antenna to

fasten the antenna.