User's Manual

25PSF in = 25 PSF out

29.97PSF=29.97PSF out

30PSF in = 30PSF out

23.98P in=23.98P out

24P in=24P out

25P in=25P out

29.97P in=29.97P out

30P in=30P out

50i in = 50i out

59.94i in = 59.94i out

60i in = 60i out

Support Full PSF resolution

TX：7059RX：3059

Application Recommendations

1.Recommended Installation Method under Ideal Position

Make receiver to stand vertically; adjust antennas to a fan-shaped arrangement;

Make transmitter to stand vertically; adjust antennas to 90° angle in the same plane.

1615

In order to reach the best performance of wireless transmission,

we recommend to meet the requirements as follows:

1. The vertical height of TX and RX should be same and more than 1.5m

2. TX and Rx are working under the condition of line of sight distance

3. Plane of TX antennas toward plane of RX antennas face-to-face

Receiver

LED Digits Display: Channel 1 ~ 9, A, b

Power Indicator: Flash slowly when the network is not connected.

Light on normally when the network is connected.

Video Indicator: HDMI and SDI outputs are enabled together,

there are two status of the indicator

2：No light: No output signals via HDMI and SDI ports

Normal/Enhanced Anti-interference Mode Indicator :

Decimal point light is off : normal mode

Decimal point light flashes slowly: enhanced anti-interference mode

1：Red and Yellow light together: RX receives the signal from TX normally,

and HDMI and SDI outputs are working together