User's Manual

11 12

D C

DC IN

7V-36V

H D M I

S D I

Monitor

SDI OUT

HDMI OUT

Receiver Installation Steps:

1. Fix the antennas and adjust their angles as shown in the figure below.

Notice:

please rotate the

golden mental

part of antenna to

fasten the antenna.

2. Connect RX with the monitor via corresponding power cable and HD

video cables as shown in the figure below.

12V power adapter

Li-battery

3. Turn on the power switch to start

power supplying.

Power Switch: ON turn on

OFF turn off

4. Press “CH” button to select the corresponding working channel of

receiver and then press “OK” button for confirmation.The LED digits

display will display one of the characters from 1 ~ 9, A and b when the

video signal of device is normal; the monitor will display the image from

camera simultaneously.