User's Manual

LED Digits Display
Transmitter
Power Indicator
Video Indicator
TX : SDI Audio Input
Mode Indicator
LED Digits Display description
LED Digits Display Status
LED Digits Display: Channel 1 ~ 9, A(10), b(11)
Video Indicator: Red: HDMI input; Yellow: SDI input
Power Indicator: Illuminate in working mode
SDI Audio Input Mode Indicator:
Decimal point light is off: SDI Audio Input Mode 0
Decimal point light is on: SDI Audio Input Mode 1
RX : Normal/Enhanced
Anti-interference
Mode Indicator
25PSF in = 25 PSF out
29.97PSF=29.97PSF out
30PSF in = 30PSF out
23.98P in=23.98P out
24P in=24P out
25P in=25P out
29.97P in=29.97P out
30P in=30P out
50i in = 50i out
59.94i in = 59.94i out
60i in = 60i out
Support Full PSF resolution
Support Full PSF resolution
Receiver
LED Digits Display: Channel 1 ~ 9, A, b
Power Indicator: Flash slowly when the network is not connected.
Light on normally when the network is connected.
Video Indicator: HDMI and SDI outputs are enabled together,
there are two status of the indicator
1：Red and Yellow light together: RX receives the signal from TX normally,
and HDMI and SDI outputs are working together
2：No light: No output signals via HDMI and SDI ports
Normal/Enhanced Anti-interference Mode Indicator :
Decimal point light is off : normal mode
Decimal point light flashes slowly: enhanced anti-interference mode
1615