User Manual

13
14
RESET
CH 2
L1
VIDEO
TX:7060
Transmitter ID
Four transmitters are numbered 1, 2, 3
and 4, respectively
Gain Mode
L
Low-gain mode
Blank
Signal Icon
X
Signal bar
Successful network connection
Video
No video signal input
VIDEO
WPS
In code matching status
Video signal input connected
Reset
The device is resetting and rebooting
CH*
Streaming mode
Camera-1
TX-1
Camera-2
TX-2
Camera-3
TX-3
Camera-4
TX-4
500m/1640ft
Four channel
Full-HD in One
RF Channel
RX-1
Switch Console
OLED Display Description
Transmitter ID
Gain mode
Signal icon
Reset & Reboot
Video
Icon
Content
Status
Reset & Reboot
Frequency Channel
Frequency Channel
Numbers 1~4
Blank
High-gain mode
Connecting
Display current frequency channel (1~11)
In streaming mode, the four channel video sources are to the four
transmitters via HDMI or SDI respectively. The receiver will receive the
four RTSP from the four transmitters and send them to the
switch console through the LAN port.
and watch the live video on the mobile phone, tablet .
transmitted
streamings
You can also connect the receiver
with mobile devices such as your mobile phone, tablet and PC via WiFi,
and PC
RJ45
PC
Monitoring on Mobile Devices