User Manual

11
12
4. The receiver can be powered by both the V-mount battery and DC-IN port via
the affiliated power adapter. If the mentioned two types of power supply are
connected at the same time, the lithium battery is prioritized in power supplying,
and the battery will switch to the power adapter for power supplying automatically
after the battery power is exhausted.
This system supports tally function. When the receiver is activated by low-level
current, the transmitter will output high-level current signal.
Power
Li-battery
Product Application
Camera-1
TX-1
Camera-2
TX-2
Camera-3
TX-3
Camera-4
TX-4
Standard mode
In standard mode, the four channel video sources are transmitted to the four
transmitters via HDMI or SDI respectively. The receiver will receive the four
channel signals and transport them to switch console or/and monitor via
HDMI SDI.or/and
HDMI/SDI
Monitor
500m/1640ft
Four channel
Full-HD in One
RF Channel
*4-channel
HDMI/SDI
*Tally
*RS232/422
Switch Console
RX-1
Live Streaming network
Transmission
Netwok