GLACIER POU Water Dispenser User Manual
1 2 3 4 5 6 1.POU Cover 2. Reset Button 3. POU Kit 4. Touch Guard® Hot Water Faucet 5. Cold Water Faucet 6.
THANK YOU FOR BUYING A CRYSTAL MOUNTAIN WATER COOLER! RECEIVING Inspect the cooler box for any evidence of shipping or handling damage. In case of shipping damage, claims should be filed promptly with the carrier.Please note that the carrier will not accept claims for any damage discovered after the signing for UNINSPECTED GOODS. Ensure cooler stands upright for 24 hours before plugging it in.
. Do not draw water from the cooler for about 30 minutes to let the water cool or heat. Optimum water temperatures will be reached after several hours of operation (Figure 5 and Figure 6). Figure 5 Figure 6 5. Ensure the following when cooler is to be serviced: 5.1 Turn off Hot Tank Switch (Hot & Cold models only) and disconnect power supply cord (Figure 7 to Figure 8). 5.2 Turn off the water supply via the shut off valve, and disconnect the water supply from the cooler (Figure 9).
3. Remove the POU Cover (if installed) (Figure 16) Use the fingertips of both hands to press on the POU Lid Assembly and turn counter clockwise till it is free from the cooler opening. (Figure 17 and Figure 18) Lift off of the cooler, and set aside. Drain the water from the reservoir and hot tank (Figure 19), remembering to cool and drain hot tank. Allow 1 hour for hot water to cool down. Figure 16 Figure 17 Figure 18 Figure 19 4.
R, P & G Series On Cook & Cold and Hot & Cold models the reservoir can be removed easily by following the steps given below. 1. Unplug and approach the cooler from the front (Figure 27) 2. Turn off the water supply via the shut off valve, and disconnect the water supply from the cooler. (Figure 28) Figure 27 Figure 28 3. Remove the POU Cover (if installed) (Figure 29) Use the fingertips of both hands to press on the POU Lid Assembly and turn counter clockwise till it is free from the cooler opening.
CLEANING Do Not Immerse the Unit in Water for Cleaning Remove any dust or contaminants from the cooler by rinsing the cold water reservoir and faucets with clean water prior to use (Figure 38 and Figure 39). Use only mild dishwashing liquid detergent for cleaning the exterior surfaces. DO NOT USE bleach or abrasive cleaners.
WARNING: The warranty and Underwriters’ Laboratory and CE listings for the coolers are invalidated if any alteration, modification, or use or misuse in combination with any other machine or devices is deemed to be the source of any claim. The manufacturer accepts no liability (including for bodily injury) resulting from any alteration, misuse, neglect, accidents, improper installations or repairs. The Red Faucet dispenses hot water during normal operation that may cause severe burns.
