System information

DevCon-Center
KVM products for industrial automation
KVM Add-Ons: configuration and status monitoring
SNMP-Trap & -Agent
Operational safety and reliability are essential for G&D
devices. The monitoring function of many G&D devices
provides the following features:
► Device configuration
► Monitoring of system statuses
► Transmission of information via SNMP and as
syslog message
The settings of every device can be configured individu-
ally via web interface or centrally for all devices via Dev-
Con-Center. G&D units with monitoring functions provide
at least one network interface as well as an integrated
web interface. The values of G&D devices are constantly
monitored. Messages about system conditions are sent
directly to the DevCon-Center.
Preventive monitoring
DevCon-Center
► Proactive monitoring and central configuration
► Compatible with all network-capable products
► Reporting of device statuses
► Supports SNMP (trap & agent) and syslog
messages
► Redundant power supply
► Two network interfaces
► Critical system statuses are recognized early and
can be prevented from the beginning
Function for preventive monitoring of G&D devices
► Defined conditions and exceeded thresholds are
stored in the web interface and can be viewed
anytime
► SNMP management software receives automa-
tically any status event sent by G&D devices
► SNMP-GET function enables you to query the
device temperature. Provides statistics on top
values as well as recognise critical values in
advance
► SNMP-SET has active impact on G&D products (for
example when changing channels at a K
VM switch)
DL-Vision web interface with monitoring values.
Network settings of SNMP agent
Supported network-capable
products:
DL-Vision
DL-Mux
ControlCenter-Digital
DVICenter
CATCenter NEO
CompactCenter X2
26 //