User manual

OPERATION

Powering Up the Systems

Once all cables have been connected and all computers have been powered up

the Switch emulates mouse and keyboard signals on each port allowing your

computer to boot normally. Your KVM switch is now ready for use.

Controlling your computers with the Dual-Head Vision KVM couldn't be easier.

The Switch allows you to access the computers and USB hub devices using

two methods of port selection:

Easy to use Port-Selectors or

Simple Hot Key combinations from the keyboard

Selecting Computers via Manual Port Selectors

You can instantly select any computer by pressing the port-selectors on the

front of the KVM Switch. The corresponding LED will light "Green" to indicate

current port selection.

Selecting Computers via Hot Keys

You can directly switch the KVM focus to any computer via the simple keyboard

command sequence using the "Scroll Lock" key and entering the switch port

number. Each computer is assigned a numeric ID.

1.To invoke the Hot key mode press the "SCROLL LOCK" key twice within two

seconds. Note that a signal 'beep' will be given as confirmation.

2.Enter your desired switch port number (1-4).

For example, if you press [SCROLL LOCK],[SCROLL LOCK], "2" the

computer on port 2 will be selected.

Alternatively, you can switch the KVM focus to any computer via the simple

keyboard command sequence using the "SCROLL LOCK"key and Up and

Down arrow keys.

Telephone + 31 (0) 23 547 88 88

CABLES

LCD TV

ARM

LCD

MONITOR ARM

HOME

KVM/VIDEO

SWITCHES

KVM/VIDEO

EXTENDER

BEAMER

MOUNTS

ERGONOMIC

SOLUTIONS