User manual

8
INSTALLATION
Where to Place the KVM Switch:
TheDual-Head KVM Switch is small, portable and designed to fit
right on the desktop. Before installation consider the following when deciding
where to place the KVM Switch;
whether or not you intend to use the manual port selectors for port
switching
the length of the cables attached to your keyboard, mouse, and
monitor
the location of your computers from your console
the length of the cables you use to connect your computers to the KVM
switch
Cable Distance Requirements:
USB signals are the strongest when transmitted up to 15 feet (4.5m) between
the KVM and the CPU. Beyond 15 feet (4.5m), probability of signal degradation,
which can cause the device to fail, is likely.
Cautions and Warnings:
Avoid placing cables near machines that create electrical noise such as
fluorescent lighting, air conditioning equipment, etc.
HARDWARE INSTALLATION
This section provides you complete instructions for the basic hardware setup of
a single switch.
Important Note:
Before you begin, make sure that power to all the devices you will be
connecting up have been powered off.
Note:To prevent damage to your installation due to ground potential
difference, make sure that all devices on the installation are
properly grounded.
Telephone + 31 (0) 23 547 88 88
CABLES
LCD TV
ARM
LCD
MONITOR ARM
HOME
KVM/VIDEO
SWITCHES
KVM/VIDEO
EXTENDER
BEAMER
MOUNTS
ERGONOMIC
SOLUTIONS
www.newstar.nl