Specifications

Technology Upgrade Security Cameras-Axis 28 3700-1
1224_01
SECTION 28 3700 – SECURITY CAMERAS
PART 1 - GENERAL
1.01 SECTION INCLUDES
A. This section includes parts, equipment and cabling required for installation of the video
surveillance cameras.
B. This shall include new IP video cameras and their cabling/termination equipment as shown
on the drawings and detailed in the specifications.
1.02 COORDINATION
A. All cables shall be coordinated with the installation of the raceways.
B. All cameras shall be installed in the ceilings in relation to the lights and other obstructions.
1.03 DESCRIPTON
A. Provide new IP cameras for video surveillance. See the detailed security drawings for
location and quantities.
B. Cameras shall be pure IP cameras without the use of external encoders/decoders where
possible.
C. Power for interior and exterior cameras shall be provided via the POE switch or via a
centralized power supply in the communications room.
1. The switches installed provide standard Type 3 PoE (15.4 watts) on each port. If a
camera requires additional power above Type 3 PoE then the contractor shall provide
that power supply and any additional required power cables.
D. PTZ cameras that require additional power above that provided from a Type 3 PoE
connections shall be provided with a power supply.
1. Provide any and all camera, power and control cables required for complete system
connectivity and functionality.
E. It shall be the Contractor’s responsibility to provide all power to cameras based on the above
methods. Take into account the Manufacturers recommendations.
PART 2 - PRODUCTS
2.01 2.01 MANUFACTURERS
A. Approved Manufacturers for IP cameras:
1. Samsung
2. Axis
3. Sony
2.02 2.02 CAMERAS
A. Cameras shall provide full color images and some shall change to black and white in low
light.
B. Cameras shall support text overlay of image in viewing to allow naming/numbering of each
camera on the screen and when video is offloaded.
C. The Contractor shall review the site with the Owner prior to ordering the lens for each
camera.
1. Finalize the needs of the Owner with the camera position to ensure that the correct
lens is purchased for the camera.
D. Where noted on the drawings, provide a vandal resistant dome to the camera.