Specifications

Technology Upgrade Security Recording 28 3600-7
1224_01
b. Provide buttons on the maps so that the user can click on the camera button
on the map and the user will be able to view the camera associated with that
button.
c. Load and populate each map with the cameras for each building where
cameras are located.
d. Provide a drill-down map control software that allows the user to click on the
site plan, then the individual building and then the floor or portion of the floor
on that building and finally the camera on that floor.
14. Software and hardware shall allow for remote input of alarm signals and contact
closure signals at remote buildings.
15. Software shall allow and control audio recording on individual cameras.
B. Client Software and/or web review
1. The viewing and reviewing software shall be accessible through client pc’s. These
PC’s shall be the standard desktop PC’s used by the principals and teachers
throughout the district.
2. Provide viewing and reviewing software to support video sent to smartphones and
tablet devices.
3. The software shall allow the following:
a. Viewing of any one or more cameras on the system
b. Tiling of one, two, four , size eight and up to 16 cameras on the viewing
screen.
c. Review of all recorded video. Interface shall allow searching by motion,
recording, time, camera and building.
4. Administrative level access shall allow setting and changes of all recording and
scheduling parameters.
5. The Contractor shall provide and install all software required as per the drawings.
See camera diagram for quantity of user to setup.
6. The software shall be able to be password protected for viewing, with additional
levels of security required for changing configuration of the recording and camera
functions.
C. Off-Site Control Software:
1. The NVR system shall allow complete monitoring, control, and configuration of all
aspects of the video system and cameras to be controlled at locations remote to the
NVR server itself.
2. The control and images shall be able to be transmitted via TCP/IP (Ethernet) network.
3. The software shall be able to be password protected for viewing, with additional
levels of security required for changing configuration of the recording and camera
functions.
D. Video Storage
1. Backups of the images shall be done continually. The oldest data shall be overwritten
when the disk becomes full.
2. Provide the connection between the NVR and the internal or external storage. The
backup shall be a direct backup and shall not be done via the building Ethernet
network
3. The storage device and all servers shall be supplied with no less than three years of
24x7 maintenance that includes next day replacement of drives and on-site
assistance.
a. Contractor shall be responsible for assisting the owner with the manufacturer
warranty in case of a warranty issue. Act as the liason between the owner and
the manufacturer.
4. Provide storage for all images for 30 days.
PART 3 - EXECUTION