Specifications

Technology Upgrade Security Recording 28 3600-5
1224_01
E. Batteries and Runtime:
1. Typical Backup Time at Half Load shall be 15 minutes.
2. Typical Backup Time at Full Load shall be 10 minutes.
3. UPS shall be in the main communications room only.
2.04 VIDEO SECURITY SOFTWARE
A. Video Recording and Control Software associated with the NVR shall:
1. The software shall store a database of device errors, alarms, and other system
events, and the comprehensive database shall be accessed and searched through
the system log window.
2. The NVR software shall provide for the following:
a. Shall contain built-in video motion detection.
b. Pan/Tilt/Zoom control of PTZ cameras via the IP connection and via on-screen
controls.
c. Connectivity to multiple viewing stations (Computers) for viewing live cameras.
Display shall show images in groups of 1, 4, 9, or 16.
d. Support connection to wireless smartphones and tablet devices.
e. Record during playback.
f. Playback by date, time, and camera.
g. On-screen programming.
h. Remote viewing and access via Ethernet.
i. Owner shall be able to review recorded video at any time without interrupting
the current recording of images from cameras.
3. The system shall support interoperability with IP camera standards including, at a
minimum, the Physical Security Interoperability Alliance (PSIA) and the Open
Network Video Interface Forum (ONVIF).
4. The recording servers shall support cameras with universal serial bus (USB)
communications.
5. The surveillance system server shall support full two-way audio between viewing
clients/web viewing clients and remote cameras/devices. Two-way audio integration
shall support the following features and functions:
a. Outgoing audio – microphone inputs to viewing clients shall transmit audio
streams to speakers attached to remote IP devices. Selectable options shall
be one-to-one (send audio to a specific IP device), and one-to-all (broadcast
to all IP devices).
b. Audio from IP devices with microphones shall be transmitted to, and recorded
by, the recording server. The audio shall be transmitted to computers with a
viewing client and installed speakers.
c. Each speaker and microphone shall be assigned to a specific camera/device.
The speaker and microphone shall have the capability to be assigned to other
devices as well.
6. The NVR shall allow remote alarms by sending an e-mail or cell phone call or pager
message upon an alarm.
a. Alarms may include:
1) Motion on a cameras image during owner specified hours
2) Loss of video signal on a camera.
3) Server or storage equipment failure
4) Other configurable parameter.
5) Output shall include an alarm to the access control system or email,
phone call or pager notification.
7. Provide for unlimited system operators with personal identification numbers (PINs)
with priority levels, operator facilities, system roles, and camera and monitor
groupings.
a. Software shall allow for segmentation of the camera viewing based on logins.
b. A person shall be able to be setup as a viewer of the cameras and only given
access to a user specified amount or location of cameras.