Specifications

Technology Upgrade Fiber Cabling 28 1500-5
1224_01
3. Fibers shall be properly aligned prior to splicing.
4. The splicer used shall be able to inject light directly into the fiber just after it is
spliced, and provide an estimate of the loss through the splice.
5. After splicing, a heat shrink tube with a rigid skeleton shall be used to protect the
splice. Coordinate this heat shrink tube with the splice tray to be installed in the splice
shelf. Heat shrink tubes shall fit into the grooves in the splice tray.
6. Loss through the splice shall be no more than .15dB.
7. Fiber pigtails shall be labeled with a self-laminating, laser printed, wrap around label
at the connector. The label shall detail the strand count of the fiber cable, the
buildings and rooms in which the fiber is terminated and the color and strand number
the pigtail is spliced to.
24MM/12SM
WRT#234-OLS #021
Brown Fiber # 16
END OF SECTION