Specifications

Technology Upgrade Communications Room 28 1100-5
1224_01
1. Where the cabinets are to be mounted to a wall, the Contractor shall first install a
piece of plywood to be used to mount the cabinet on. Secure the plywood to the wall
then secure the cabinet to the plywood and wall where possible.
2. Review the facilities above a cabinet prior to installation. When possible, cabinets
should not be installed below water pipes or other facilities in the ceiling.
3. Mount the cabinet so that the top of the cabinet is not more than 7 feet AFF.
4. Check to make sure that the cabinet will be able to fully open from both hinges after
installation. Change mounting location to accommodate the opening.
5. Install support wheels to the cabinet to support the weight of the cabinet when it is
closed.
END OF SECTION