Specifications

Technology Upgrade Training 28 7750-1
1224_01
SECTION 28 7750 – TRAINING
PART 1 - GENERAL
1.01 SECTION INCLUDES
A. This section includes directions for the Contractor regarding system cutover and training.
1.02 SYSTEM DESCRIPTION
A. The Contractor shall provide training on all the installed systems.
PART 2 - PRODUCTS
Not used.
PART 3 - EXECUTION
3.01 GENERAL TRAINING REQUIREMENTS
A. The Contractor shall provide training on all systems installed or upgraded as part of the
contract.
1. The Contractor shall involve the personnel from the Owner’s office in the
implementation and configuration of the network systems.
2. Prior to the cutover of the system, the Contractor shall work with the Owner on the
training that will be provided. The Owner and the Contractor shall schedule the
training at a time beneficial to both.
3. Each system is to have training provided as part of the installation.
4. Each training session shall include.
a. This training will give an overview of the capabilities of each system, and the
methods to be employed in utilizing the system.
b. The Contractor shall provide a syllabus detailing what will be discussed at the
training, and notes for the Owner to refer to during the life of the system. The
notes shall list directions for general use of the system and possible fixes to
general issues that could occur.
c. Training shall include as-built diagrams of the connectivity, a walk-thru of the
system, a demonstration of actual user interface with the system, and
directions on its general use.
d. This training is only meant to give an overview of each system. In depth
training shall be provided for an in-depth analysis of certain systems as
described below.
5. For all training, the Contractor shall pay all expenses.
B. Create cheat sheets for all systems that the users can keep after the training.
1. Cheat sheet shall include details on how to use the system.
2. A copy of the cheat sheet shall be laminated and installed at the system location.
3. For individual training the contractor shall provide a cheat sheet for each person
being trained.
3.02 DATA CABLING TRAINING
A. Training on the structured cabling system shall be as follows:
1. Contractor shall provide a 2 hour in depth training class on the connectivity and use
of the structured cabling system.
2. Training class shall be on-site utilizing the actual equipment installed as part of the
system.
3. The class shall be open to 4 of the Owner’s Representatives.