Specifications

Technology Upgrade Labeling 28 7600-6
1224_01
Lenawee ISD
Install: 2/15/2015
IP: 10.10.25.258
Contractor name here
K. Engraved lamacoid labels shall be provided and installed whenever there is no location for
paper inserts on faceplates, power poles, poke thru’s, floor boxes, modular furniture and
surface raceway.
1. Engraved lamacoid labels shall provide the same labeling as the paper inserts, but
they shall be self-adhesive.
2. These labels shall be adhered to the location closest to the modular jack.
3. Individual letters shall be provided for each cable. An overall location identifier can be
provided for all the cables at that faceplate or floor box.
4. Engraved labels for rack shall be at least 1-1/2 inch high with letters 1 inch high.
5. These labels shall be affixed to the top and front of each rack or cabinet. Verify that
the label will fit the rack or cabinet prior to purchasing.
L. All labels shall be installed to more easily identify the cables and ports on all panels. If there
are any questions regarding labeling, contact the Engineer prior to installation.
END OF SECTION