Specifications

Technology Upgrade Labeling 28 7600-4

1224_01

Figure A – Label for 36 Port Fiber Patch Panel

F. Paper inserts shall be supplied for all faceplates and patch panels labels.

1. Paper inserts for the faceplate shall detail the exact location identifier for each cable.

2. They shall fully cover the background of the insert space on the faceplate, but all

numbers and letters of the identifier shall be visible after installation of the plastic

cover plate.

3. The paper insert for a standard faceplate will look like this:

A-2-24 A-2-5

Top Label Strip

A-2-26

Bottom Label Strip

4. Provide a sample label to the Engineer for approval prior to installation of all labels.

G. Camera cable shall be labeled.

1. For CAT-6 cables the contractor shall label as detailed on the drawing

2. Each cable shall have a unique identifier and shall be labeled with a wrap around

label at each end with an adhesive, self-laminating label showing that unique

identifier.

3. Cable labels for camera cables shall be installed within 4 inches of the end of the

cable sheath.

A-X-YY-DDD

The A stands for the communications room where the cables are terminated.

The X represents that the Patch panel in that comm. room.