Specifications

Technology Upgrade Wireless 28 6250-4
1224_01
2. Operating Channels: Based on the regulatory domain specified by the system
administrator
3. Association Rates: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9
Mbps and 6 Mbps with automatic fallback
4. Modulation: Orthogonal frequency division multiplexing (OFDM)
5. Transmit Power: Based on the regulatory domain specified by the system
administrator
H. 802.11b Radio Specifications
1. Frequency Band: 2.4 GHz - 2.484 GHz
2. Operating Channels: Based on the regulatory domain specified by the system
administrator
3. Association Rates: 11 Mbps, 5.5 Mbps, 2 Mbps and 1 Mbps with automatic fallback
4. Modulation: Direct-sequence spread-spectrum (DSSS)
5. Transmit Power: Based on the regulatory domain specified by the system
administrator
I. 802.11g Radio Specifications
1. Frequency Band: 2.4 GHz - 2.484 GHz.
2. Operating Channels: Based on the regulatory domain specified by the system
administrator.
3. Association Rates: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9
Mbps and 6 Mbps with automatic fallback.
4. Modulation: Orthogonal frequency division multiplexing (OFDM).
5. Transmit Power: Based on the regulatory domain specified by the system
administrator.
J. 802.11n Radio Specifications
1. Frequency Band: 2.4 GHz - 2.484 GHz. And : 5.15 GHz - 5.85 GHz
2. Operating Channels: Based on the regulatory domain specified by the system
administrator.
3. Association Rates: 54 Mbps to 300 Mbps.
4. Modulation: Orthogonal frequency division multiplexing (OFDM).
5. Transmit Power: Based on the regulatory domain specified by the system
administrator.
K. 802.11ac Radio Specifications
1. Shall be equipped with dual radios and three spatial streams.
2. Frequency Band: 5.15 GHz - 5.85 GHz
3. Operating Channels: Based on the regulatory domain specified by the system
administrator.
4. Association Rates: 19.5- Mbps to 1300 Mbps combined three streams. 6.5-433.3 for
each stream
5. Modulation: Orthogonal frequency division multiplexing (OFDM) support for BPSK,
QPSK, 16-QAM, 64-QAM, 256-QAM
6. Transmit Power: Based on the regulatory domain specified by the system
administrator.
2.04 SYSTEM REQUIREMENTS
A. The contractor shall complete a site visit of each site and then complete a software based
predictive survey of each building prior to installing the cabling or access points.
B. Locate the access points as suggested by the wireless survey.
C. All patch cables required for the entire connectivity of the wireless network shall be provided
and installed by the contractor.
D. The overall intent of the wireless network is to provide a high-speed wireless system for
connecting all the users and guests to the network or internet.,
PART 3 - EXECUTION
3.01 EXAMINATION