Technical data

WARNING

THIS APPLIANCE HAS A NAKED FLAME, AS WITH ALL SUCH FIRES IT

IS RECOMMENDED THAT A FIREGUARD SHOULD BE USED FOR THE

PROTECTION OF CHILDREN, THE ELDERLY AND INFIRM. FIRE

GUARDS SHOULD CONFORM TO BS8423 2002 (FIREGUARDS FOR FIRES

AND HEATING APPLIANCES FOR DOMESTIC USE-SPECIFICATION)

INSTALLATION REQUIREMENTS

PRE CAST FLUES

A PRECAST FLUE CONFORMING TO THE REQUIREMENTS OF BS 1289

PART 1.FOR DETAILS OF THE DIMENSIONS REQUIRED TO LOCATE

POSITION OF THE APPLIANCE WITHIN THE OPENING/STARTER BLOCKS

SEE FIG 1.

WITH A MINIMUM 3 METERS EFFECTIVE HEIGHT.

400mm

560mm

200mm

300mm

765mm

50mm

FIG 1

NOTE

AN INSPECTION SHOULD BE MADE TO ENSURE THAT THE INTERNAL

WALLS OF THE FLUE ARE CLEAR OF MORTAR FANGS PRIOR TO

INSTALLING THE APPLIANCE.

A 50mm SPACER CAN BE FITTED TO ALLOW MORE DEPTH IF REQUIRED

USING THE FOLLOWING PROCEDURE.

MARK POSITION OF FLANGE HOLES, DRILL AND PLUG AND FIX SPACER

USING FOAM SEAL SUPPLIED. THEN SCREW FIRE TO SPACER SEALING

WITH FOAM SEAL SUPPLIED AND SCREWS SUPPLIED WITH SPACER.

ISSUE 2