Technical Specifications

Page 1 of 6 Pages
See inside for additional Precautionary Statements and complete Directions for Use.
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
Do not apply this product in a way that will contact adults, children or pets, either directly or
through drift. Do not allow adults, children or pets to enter the treated areas until sprays have
settled.
This product is corrosive to cotton fabrics. Do not allow clothing to come in contact with
concentrate or dilution. Application, handling, or storage equipment MUST consist of fiberglass,
PVC’s, polypropylenes, viton, most plastics, or stainless steel. Never use mild steel, nylon,
brass, or copper around full strength this product. Wash spray equipment after each application.
INFORMATION
Do not use in residential ornamental fish ponds or other artificial aquaculture systems
containing Koi or trout.
This product is effective in controlling a broad range of algae including; Chara, Spirogyra,
Cladophora, Ulothrix, and Oscillatoria.
In addition, this product is effective in controlling rooted and floating aquatic plants such as
Hydrilla, Potomogeten sp., and Water Hyacinth.
Water treated with this product may be used for swimming, fishing, livestock watering, and
irrigation. For best results, apply when livestock water consumption is low or watering area is
not in use. This product effectively controls Chara, Spirogyra, Cladophora, Ulothrix and
Oscillatoria; algae growth commonly found in livestock watering tanks, troughs, and ponds.
The minimum retreatment interval is 14 days. No more than ½ of the body of water may be
treated at one time.
ALGAECIDE APPLICATION
This product can be applied by simply pouring into the water, as a surface spray, or by injection.
For effective control, the proper chemical concentration should be maintained for a minimum of
three hours duration to assure adequate uptake. The application rates in the chart below are
based on static or low flow conditions. When significant dilution occurs from inflow of
untreated waters within the three-hour period the chemical may need to be metered. (See drip
system application)
•
Identify the algae growth present as one of the following: planktonic, filamentous, or Chara.
•
Determine the surface area and average depth to be treated.
•
Refer to the chart below to determine the amount of this product to apply per 1000 sq. ft. of
surface area.