User manual

23
Module to the CI slot.
2.You can read the detail information about the smart card and CI module after it
initialize OK.
3. The Pay-TV which correspond to CI module standard can be decoded.
6.7 Connecting to the LAN
6.7.1 IP Setting
1. Connect one end of the
Ethernet cable to the product
and the other end to the LAN
router.
2. Menu-> SETTINGS ->IP
Setting
If the Ethernet cable is connected
fine, it will display “Connect”. In
this menu, you can set IP address
manually, also you can get IP
address automatically.
GREEN: Test the network if connect correctly.
6.7.2 Connecting to the Wi-Fi (Wireless LAN)
1. Plug in the wireless USB
dongle to the USB port.
2. Enter
Menu->SETTINGS->Wireless
Setting->Search Access
Pointer.
3. Select the network name of
your Wi-Fi access point from the