User manual

 Add Transponder

Press GREEN button to add. Here you can input new transponder frequency: input

new frequency, choose polarisation (16QAM, 32QAM，64QAM，128QAM，256QAM)

and input new symbol rate. Then Press the OK button to confirm the setting and this

new Transponder will be added to the TP list.

 Edit Transponder

In this menu, you can press the CH+/CH- button to choose the Transponder which

you want to edit, press YELLOW button to edit. Here you can edit the transponder

frequency: input new frequency, choose polarisation and input new symbol rate then

press OK button to confirm your settings; the Transponder can be changed.

 Delete Transponder

Press BLUE button, you can delete transponder and press OK button to confirm your

selection.

4.3 Auto Search

Menu-> INTALLATION ->Auto Search

Auto Search allows you to search all Transponder program.

4.4 Blind Search

Menu-> INTALLATION ->Blind Search

select Blind Search then press the OK button to confirm.

4.5 Factory Default

You can restore the product to the factory default and you can also setup it according