Installation guide

WF200 802.11g Wireless Router

3. Connecting Wireless ADSL2+ Router via Ethernet

Your router can be managed from anywhere with the embedded Web configuration using a Web

browser, such as Microsoft Internet Explorer or Netscape Navigator. Internet Explorer 6.0 and later or

Netscape Navigator 7.0 and later versions with JavaScript enabled should be used.

3.1 Setup Wireless ADSL2+ router via Ethernet Cable

If there is an available LAN card present on your PC, you just simply connect ADSL router and PC

through the Ethernet cable. Once you establish Internet connection, you could browse the Web through

the Ethernet cable.

3.2 Configure TCP/IP

For Windows 98SE and ME

Step 1: Click Start then Settings and choose Control Panel

Step 2: Double click Network icon.

Step 3: Select Configuration tab, then choose TCP/IP from the list of installed network

Components and click Properties button.

Step 4: You can setup the following configurations in two methods:

Option1:

Get an IP from Router Automatically

Select the IP Address tab.

In this page, click Obtain an IP address automatically radio button.