Installation guide

WF200 802.11g Wireless Router
8
z RJ45 Ethernet Port
2.2 Package Contents
z Wireless ADSL2+ Router
z RJ-45 Ethernet cable
z RJ-11 Phone cable
z Power Adapter
z Quick Installation Guide
z 2 Years Warranty
z One External Antenna
2.3 Front Panel Indicators and Description
Front panel of this Wireless ADSL2+ router has LED indicators to display router’s operating status.
Descriptions of LED status
PWR When an active power adapter is connected with this router, this LED will light up.
WLAN
When WLAN card installed properly, this LED will be flashing. When transferring data, the
LED will be steadily.
ADSL
When connection with Internet (ADSL Connected) is established, this LED will light up.
When this LED is flashing: NO ADSL physical connection
X1 When port 1 connection with PC or Switch / Hub is established, this LED will light up.
X2 When port 2 connection with PC or Switch / Hub is established, this LED will light up.
X3 When port 3 connection with PC or Switch / Hub is established, this LED will light up.
X4 When port 4 connection with PC or Switch / Hub is established, this LED will light up.
2.4 Back Panel
LINE Connect with phone cable
RESET Reset button. Reset the setting to default.
4x Connect with Ethernet Cable to Switch Hub or PC
3x Connect with Ethernet Cable to Switch Hub or PC
2x Connect with Ethernet Cable to Switch Hub or PC
1x Connect with Ethernet Cable to Switch Hub or PC
DC IN Connect to DC Power Adapter
2.5 Connect Related Devices
1) Connect Router to LINE
Plug the provided RJ-11 phone cable into LINE port on the back panel of the router and
insert the other end into splitter or wall phone jack.
2) Connect Router to LAN
Plug RJ-45 Ethernet Cable into LAN port on the back panel of the router and insert the
other end of the Ethernet cable on your PC’s Ethernet port or switch / hub.
3) Connect Router to Power Adapter
Plug Power Adapter to PWR port on the back panel of the router and the other end to a
power outlet.
Warning! Only use the power adapter provided in the package, otherwise it may cause hardware
damage.