Installation guide

WF200 802.11g Wireless Router
54
error rate performance will improve, but the data rate will decrease. Conversely, if the SNR Margin is
decreased, bit error rate performance will decrease, but the data rate will increase.
Line Attenuation: Attenuation is the decrease in magnitude of the ADSL line signal between the
transmitter (Central Office DSLAM) and the receiver (Client ADSL Modem), measured in dB. It is
measured by calculating the difference in dB between the signal power level received at the Client
ADSL Router and the reference signal power level transmitted from the Central Office DSLAM.
Data Rate: This field displays the ADSL data rate.
9.2 System Log
The System Log displays data generated or acquired by routine system communication with other
devices, such as the results of negotiations with the ISP's computers for DNS and gateway IP
addresses. The device keeps a running log of events and activities occurring on the Router. You can
click Save Log to display a Windows File Download dialog box that enables opening or saving the
contents of the log to your PC. To remove all entries from the list, click Clear Log. New entries will
begin accumulating. If the device is rebooted, the logs are automatically cleared.
9.3 Statistics
The ADSL Router keeps statistic of traffic that passes through it. You are able to view the amount of
packets that passes through the Router on both the WAN port & the LAN port. The traffic counter will
reset if the device is rebooted. You can select Ethernet/ADSL/WLAN to view the statistics report of
LAN/WAN.