Installation guide

WF200 802.11g Wireless Router

8.5 Diagnostic

The Diagnostic Test page shows the test results for the connectivity of the physical layer and protocol

layer for LAN & WAN sides.

Select which PVC you wish to test from the dropdown list. The router will automatically run diagnostic

tests on that circuit. A green PASS means that the given test was passed, a red FAIL means that the

test was failed and a green SKIPPED means that the test was skipped.

Note: 1) User ONLY can view PVC0’s Diagnostic Test connection.

2) “Testing ADSL Synchronization” might take 30 sec to execute the Diagnostic Test.

9. Status

9.1 Device Info

The Device Info screen is a tool that you use to monitor your ADSL Router. It shows the Firmware

Version, WAN, LAN, and MAC address information. Note that these fields are read-only and are not

meant for diagnostic purposes. Except the Virtual Circuit, click the drop-down list and select the name

of the Virtual Circuit on which the system status is to be shown.