Installation guide

WF200 802.11g Wireless Router

6 Advanced Setup

6.1 Firewall

User can enable or disable firewall feature of the ADSL router in the following page.

Firewall: Select this option can automatically detect and block Denial of Service (DoS) attacks, such

as Ping of Death, SYN Flood, Port Scan and Land Attack.

SPI: Select this option to Enabled or Disabled the SPI feature. (NOTE:

If you enable SPI, all traffics

initiate from WAN would be blocked, including DMZ, Virtual Server, and ACL WAN side)

6.2 Routing

This table lists IP address of Internet destinations commonly accessed by your network. When a

computer requests to send data to a listed destination, the device uses the Gateway IP to identify the

first Internet router it should contact to route the data most efficiently. Select this option will list the

routing table information. You can press ADD ROUTE to edit the static route. (As below screen)

[Static Route]

Select this option to set Static Routing information.