Installation guide

WF200 802.11g Wireless Router
32
5.3 Wireless
5.3.1 Access Point Settings
Access Point: Select this section for Activated or Deactivated AP function.
Channel: Select the local channel from the drop down list.
Beacon Interval: The Beacon Interval value indicates the frequency interval of the beacon. Enter a
value between 20 and 1000. A beacon is a packet broadcast by the Router to synchronize the wireless
network.
RTS/CTS Threshold: The RTS (Request To Send) threshold (number of bytes) for enabling RTS/CTS
handshake. Data with its frame size larger than this value will perform the RTS/CTS handshake. Set
this attribute to be larger than the maximum MSDU (MAC Service Data Unit) size TURNS OFF the
RTS/CTS handshake. Set this attribute to ZERO TURNS ON the RTS/CTS handshake. Enter a value
between 0 and 2432.
Fragment Threshold: The threshold (number of bytes) for the fragmentation boundary for directed
messages. It is the maximum data fragment size that can be sent. Enter a value between 256 and 2432.
DTIM: This value is between 1 and 255, indicates the interval of the Delivery Traffic Indication
Message (DTIM).
802.11 b/g: Select the wireless mode in the sectio
n.