Installation guide

WF200 802.11g Wireless Router

Click an Interface Setup link to set ATM VC values, ISP Encapsulation, configure multi- connection

settings, and LAN configuration.

5.1 Internet

The Internet screen allows you to set up how your router connects to the Internet. If you already ran the

Quick Start wizard, the information you provided to the wizard should be entered into the fields

already. After you finish the changes, click on the SAVE button to save your changes.

5.1.1 ATM VC & QoS

ATM settings are used to connect to your ISP. Your ISP provides VPI, VCI, settings to you. In this

Device, you can totally setup 8 PVCs on different encapsulations if you apply 8 different virtual

circuits from your ISP. You need to activate the VC to take effect. For PVCs management, you can use

ATM QOS to setup each PVC traffic line’s priority.

Virtual Circuit: Select the VC number you want to setup.

Status: Select Activated or Deactived mode.

VPI: Virtual Path Identifier. The valid range for the VPI is 0 to 255.