Installation Manual

Cryptera A/S SV/INT3520-2000-10 rev.B Page 7 of 22
Installation Manual
2.2 Product Marking
The product and packaging contains the following labels:
Part
Label Content
Device
The device holds a product label with the following information:
NFC Reader INT3520
Cryptera Part No.: INT3520-20xx Ryy
1)
PCI Approval No.: 4-80048
2)
FW: 414-xxxx y.z.v
3)
PCD ID: 901-0002 R1A
4)
FCC ID: 2AQ2N-INT3520
IC: 25683-INT3520
Made in Denmark: YYYY-MM
5)
Prod. ID and S/N: xxxx-yyyyyyyy
6)
CE and WEEE symbols
Cryptera company address
Clam-shell
The clam-shell holds a copy of the product label (see above) and a
separate tamper label.
Table notes:
1) ‘xx’ indicates variant and ‘yy’ indicates revision – as in ‘INT3520-2020 R1A’.
2) As listed on the PCI website.
3) ‘xxxx’ indicates application and ‘y.z.v’ indicates revision – as in ‘414-0730
P2.1.0’.
4) As listed on the EMVCo website.
5) Production code, where ‘YYYY’ indicates year and ‘MM’ indicates month – as
in ‘2018-08’.
6) Barcode and digits, ‘xxxx’ indicates Product ID and ‘yyyyyyyy’ indicates the
serial number of the device.
2.3 Document Structure
The following Section 0 contains information about the general handling of the device,
Section 4 describes the technical characteristics, and Sections 0 and 0 covers the
mechanical respectively electrical integration.
The SW API is described in [SW].