Datasheet

INPUT SPECIFICATIONS (1)
Description DRxxDxx DRxxBxx DRxxAxx DRxxExx
Control Voltage Range (4) 4.0-32 VDC 90-140 Vrms 200-265 Vrms 18-36 Vrms
Minimum Turn-On Voltage 4.0 VDC 90 Vrms 200 Vrms 18 Vrms
Minimum Turn-Off Voltage 1.0 VDC 10 Vrms 90 Vrms 4 Vrms
Minimum Input Current [mA] (5) 9 3 2.5 3.5
Maximum Input Current [mA] (5) 11 5 3.3 8
Maximum Turn-On Time (6) (7) 1/2 Cycle 20 msec 20 msec 20 msec
Maximum Turn-Off Time (8) 1/2 Cycle 30 msec 30 msec 30 msec
Min/Max stranded/solid wire 22/16 AWG 22/16 AWG 22/16 AWG 22/16 AWG
GENERAL SPECIFICATIONS (1)
Description Parameters
Dielectric Strength, Input to Output (50/60Hz) 4000Vrms (9)
Minimum Insulation Resistance (@ 500 V DC)
10
9
Ohms
Maximum Capacitance, Input/Output 10 pF
Ambient Operating Temperature Range -30ºC to 80ºC
Ambient Storage Temperature Range -30ºC to 100ºC
Recommended Terminal Screw Torque Range: 4.4-7.0 in lb (0.5-0.8 Nm)
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) See Derating Curves
2A) For AC output frequency is 47-63Hz
3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
4) DC control includes reverse polarity protection.
5) Input circuitry incorporates active current limiter.
6) Turn-on time for DC control random turn-on versions is 0.1 msec
7) Turn-on time for DC output 600µsec
8) Turn-off time for DC output 300µsec
9) 2500 Vrms for DC output
Standards of Compliance
IEC 62314
LC A, Resistive or Slightly Inductive Load Ratings: 3A @ 40°C ambient for DR24x03, 3A @ 40°C ambient for DR48x03
LC B, Motor Loads Ratings: 0.18KW @ 240VAC for DR24x03 and 0.375KW @ 480VAC DR48x03
Shock and Vibration (Applies to all part numbers)
Vibration Resistance according to IEC 60068-2-6: 0.35mm and 0.75mm Amplitude over 10-55 Hz
Shock Resistance according to IEC 60068-2-27: 15g/11ms
EMC (Applies to all part numbers)
IEC 61000-4-2 : Electrostatic Discharge – Level 3
IEC 61000-4-4 : Electrically Fast Transients – Level 3
IEC 61000-4-5 : Electrical Surges – Level 3