Owner's Manual

ManualsBrandsCRUX ManualsAudio accessories & installationWiring Interface

RADIO REPLACEMENT

INTERFACING SOLUTIONS

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.031220

SOOCR-26

Radio Replacement for

CHRYSLER, DODGE and JEEP Vehicles

1 of 3

PRODUCT FEATURES:

NOTES:

PARTS INCLUDED:

- Retains factory features in select Chrysler, Dodge and Jeep vehicles while funconing with an

aermarket radio.

- Supports amplied and non-amplied systems.

- Provides reverse trigger for rear view camera.

- EIA color coded wiring for easy installaon

1. The Front and Rear fading are NON-Adjustable on amplied systems.

2. Also supports radio replacement in vehicles with 4.3” and 8.4” color screens.

SOOCR-26 MODULE 1st Generaon Harness 2nd Generaon Harness Audio Filter

INSTALLATION DIAGRAM:

The SOOCR-26 includes 2 harnesses for older and new model vehicles. See installaon diagrams below

for each harness.

1st Generaon Harness

AFTERMARKET

RADIO

TO FACTORY

HARNESS

12-Pin Black

Connector

AMPLIFIED

NON AMPLIFIED

*Does not supply Reverse Trigger on Manual Transmissions. Reverse trigger

wire from the aftermarket radio and/or camera power must be connected to

factory reverse light wire instead.

See page 2 for

speaker wire

connections

VSS (Vehicle Speed Sense) Pink

Illumina�on (+) Orange

Antenna/Amp Power Blue/ White

Reverse Trigger* Purple/White

+12V Constant Yellow

+12V ACC Red

Ground Black

First Generation Harness

Audio

Filter

Summary of content (3 pages)

PAGE 1
SOOCR-26 R RADIO REPLACEMENT Radio Replacement for CHRYSLER, DODGE and JEEP Vehicles INTERFACING SOLUTIONS PRODUCT FEATURES: - Retains factory features in select Chrysler, Dodge and Jeep vehicles while functioning with an aftermarket radio. - Supports amplified and non-amplified systems. - Provides reverse trigger for rear view camera. - EIA color coded wiring for easy installation NOTES: 1. The Front and Rear fading are NON-Adjustable on amplified systems. 2.
PAGE 2
SOOCR-26 R RADIO REPLACEMENT Radio Replacement for CHRYSLER, DODGE and JEEP Vehicles INTERFACING SOLUTIONS 2nd Generation Harness VSS (Vehicle Speed Sense) Illumina�on (+) Power Antenna Reverse Trigger* +12V Constant +12V ACC Ground Pink Orange Blue/ White Puple/White Yellow Red Black See below for speaker wire connections AFTERMARKET RADIO AMPLIFIED NON AMPLIFIED Audio Filter 12-Pin Black Connector TO FACTORY HARNESS Second Generation Harness *Does not supply Reverse Trigger on Manual Transmis
PAGE 3
SOOCR-26 R RADIO REPLACEMENT Radio Replacement for CHRYSLER, DODGE and JEEP Vehicles INTERFACING SOLUTIONS FOR 4.3” AND 8.4” SCREEN REPLACEMENT: When replacing the radio with a 4.3” OR 8.4” screen, you will need to tap the CAN signals along with Power, Ground, and Speakers from the factory White 22-Pin connector. Tap the wires as shown below. Again, these connections are made on the factory White 22-pin connector.