Manual

R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RFM-TYH
Multi View Integration Interface with A/V Input
and Side Mirror Mounted Cameras For Toyota Highlander
VEHICLE APPLICATIONS:
TOYOTA
2. The RFM-TYH will need to be programmed once to turn
on the Le and Right side cameras as follows:
- Turn on Le turn signal then press and hold the Hang Up
buon on SWC for 3 seconds.
- Turn on the Right Turn signal then press and hold the
Hang Up buon on SWC for 3 seconds.
The automac turn signal trigger funcon can be turned
o by following the steps above.
1. Press and hold the HANG UP buon for 3 seconds to
turn on forced camera view mode. Each press of the buon
thereaer toggles which ever cameras are turned on using
the DIP switches. It will also toggle to AV mode.
3. The le and right turn signal triggers the respecve
side camera. See diagram on page 2 for wire connecon
informaon.
4. The front camera (if installed) will automacally show on
the screen for 10 seconds when the gear is put to Drive from
Reverse.
5. Go to AUX IN mode on the radio to hear audio when using
the AV Input. Image shown using Crux part# VCIP5, HDMI to
CVBS adapter. (sold separately)
CSV-TYH side mirror mounted camera.
2017 - 2018 Highlander
OPERATION:
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
5 of 5 rev.91218