Manual

R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RFM-TYH
Multi View Integration Interface with A/V Input
and Side Mirror Mounted Cameras For Toyota Highlander
RFM-TYH module installaon:
1. Carefully remove the AC controls trim with a plasc pry
tool. Unplug the connectors on the back.
2. Remove the le and right AC vents using a hook tool.
3. Remove the 4 screws holding the radio. Note that there is
a screw behind the le and right AC vent.
4. Make the connecons from the radio to the RFM-TYH
T-harness. There are 3 connectors that you need to remove.
See diagram on page 2.
5. Run all camera wires towards the radio and make the
video RCA connecons at the RFM-TYH harness. See
diagram on page 2 for the camera power connecons.
6. Set the DIP switches according to the DIP SWITCH
SETTINGS chart on page 2. Test for funconality before
reinstalling the radio.
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
4 of 5 rev.91218