Manual

ManualsBrandsCrux ManualsAV Input & Phone MirroringMulti-Camera A/V Interface for Toyota Highlander

CFF-01 Bullet Type Front Camera

(Recommended)

CUL-04 Lip Mount Camera CLP-12 License Plate Mount Camera

RFM-TYH

Multi View Integration Interface with A/V Input

and Side Mirror Mounted Cameras For Toyota Highlander

INTERFACING SOLUTIONS

Sightline

Multi View Integration

- Adds a reverse camera input, plus 5 video inputs, and an addional audio/video input.

- Uses the steering wheel control buons to toggle between the sources.

- Turn signals automacally trigger the corresponding side camera.

- Turn signal camera trigger can be turned on or o by using the SWC buon.

PRODUCT FEATURES:

PARTS INCLUDED:

RFM-TYH Module RFM-TYH Harness CSV-TYH Highlander Side Mirror Camera

OPTIONAL ADD-ON CAMERAS:

Oponal add on cameras are available to complete the mul-view capability of the RFM-TYH. Cameras available

and sold separately include: (More cameras can be found at www.cruxinterfacing.com)

CUL-16 Lip Mount Camera

CFF-02 Square Body Front Camera CFF-03 Grille Mount Front Camera

Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

1 of 5 rev.91218

Summary of content (5 pages)

PAGE 1
R RFM-TYH Sightline Multi View Integration Multi View Integration Interface with A/V Input and Side Mirror Mounted Cameras For Toyota Highlander INTERFACING SOLUTIONS PRODUCT FEATURES: - Adds a reverse camera input, plus 5 video inputs, and an additional audio/video input. Uses the steering wheel control buttons to toggle between the sources. Turn signals automatically trigger the corresponding side camera. Turn signal camera trigger can be turned on or off by using the SWC button.
PAGE 2
R RFM-TYH Sightline Multi View Integration Interface with A/V Input and Side Mirror Mounted Cameras For Toyota Highlander Multi View Integration INTERFACING SOLUTIONS INSTALLATION DIAGRAM: To Vehicle Harness 10 PIN 30 PIN 28 PIN Connect this 6-pin plug if OEM backup camera is being used Audio/Video Input Front and Rear Camera Power Output +12V (purple/white) Left and Right Camera Power Output +12V (green/white) Cargo and Trailer Camera Power Output +12V (orange/white) Right Turn Signal Input (gre
PAGE 3
R RFM-TYH Sightline Multi View Integration Interface with A/V Input and Side Mirror Mounted Cameras For Toyota Highlander Multi View Integration INTERFACING SOLUTIONS OPERATION: Side Mirror Mounted Camera Installation: Side mirror camera installation below is on a 2018 Toyota Tacoma. Installation on a 2017 Highlander is similar. 1. Remove the felt liner inside the door pull and remove the screw. 2. Remove the door unlock handle cover and remove the screw. 3.
PAGE 4
R RFM-TYH Sightline Multi View Integration Interface with A/V Input and Side Mirror Mounted Cameras For Toyota Highlander Multi View Integration INTERFACING SOLUTIONS RFM-TYH module installation: 1. Carefully remove the AC controls trim with a plastic pry tool. Unplug the connectors on the back. 2. Remove the left and right AC vents using a hook tool. 3. Remove the 4 screws holding the radio. Note that there is a screw behind the left and right AC vent. 4.
PAGE 5
R RFM-TYH Sightline Multi View Integration Interface with A/V Input and Side Mirror Mounted Cameras For Toyota Highlander Multi View Integration INTERFACING SOLUTIONS OPERATION: 2. The RFM-TYH will need to be programmed once to turn on the Left and Right side cameras as follows: - Turn on Left turn signal then press and hold the Hang Up button on SWC for 3 seconds. - Turn on the Right Turn signal then press and hold the Hang Up button on SWC for 3 seconds. 1.