Manual

R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RFM-FD8
Multi View Integration Interface with
Side Mirror Mounted Cameras for Ford F-150 with 8” Sync 3 Screen
RFM-FD8 module installaon: (Note: Sample installaon is with a 4” screen radio. Installaon is similar with an 8” screen.
1. Li the rubber mat on the dashboard upper tray and
remove the 2 screws.
2. Remove the tray and remove the 2 screws holding the
radio bezel.
3. Carefully pull out the radio bezel. This is held by mulple
clips.
4. Remove the radio, unplug the 12-pin connector and plug
it into the RFM-FD8 T-harness. Plug the other end of the
T-harness to the radio.
5. Install the cameras and run the video and power cables
towards the radio. Make the video and power connecons.
The RFM-FD8 provides +12V power to the cameras.
6. Plug the white, 18-pin connector of the T-harness to the
RFM-FD8 module.
Crux Interfacing Solutions • 6860 Canby Ave., Suite 104, Reseda, CA 91335
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
4 of 5
rev.020519