Owner's Manual

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.010521
SWRGM-49
Radio Replacement Interface with Steering Wheel Control
Retention for GM LAN 29-Bit Vehicles 2006-2015
3 of 3
RADIO REPLACEMENT
SWC RETENTION
+
R
INTERFACING SOLUTIONS
The SWRGM-49 has a potenometer to adjust the chime
volume. It is set at half way by default. To adjust the volume,
simply use a suitable screw driver and turn the potenometer
clockwise to increase the volume and counter-clockwise to
decrease the volume.
Chime
Volume
Adjustment
CHIME VOLUME ADJUSTMENT:
BACKUP CAMERA CONNECTION:
You can retain the factory back-up camera by using the CRUX 2543 harness included in the kit.
1. Connect the 16-pin back-up camera harness to the vehicle’s 16-pin factory backup camera connector.
2. Connect the Yellow video RCA to the new aermarket radio camera input.
3. Test the video feed before installing the radio back into the dashboard.
VEHICLE SPEED SENSE (VSS)
VEHICLE APPLICATIONS:
BUICK
2008-2017 Enclave
2006-2011 Lucerne
CADILLAC
2007-2014 Escalade
2007-2009 SRX
CHEVROLET
2007-2013 Avalanche*
2007-2008 Equinox
2008-2016 Express Van**
2006-2013 Impala / Impala SS
2014-2016 Impala Classic
2006-2007 Monte Carlo
2007-2013 Silverado 1500-3500 Pickup*
2007-2014 Suburban*
2007-2014 Tahoe*
2009-2017 Traverse
GMC
2007-2016 Acadia
2017 Acadia Classic
2008-2017 Savana**
2007-2013 Sierra 1500-3500 Pickup*
2007-2014 Yukon*
HUMMER
2008-2009 H2
PONTIAC
2007-2009 Torrent
SATURN
2007-2009 Outlook
2008-2009 Vue
SUZUKI
2007-2008 XL7
1. *NOT compable with 2012-Up SUVs/Trucks that are equipped with factory-installed Navigaon radios.
2. **NOT compable with Express and Savana vans that are powered by a diesel engine.
NOTE:
Does not retain the factory backup camera on models that show the camera image on the rearview mirror.