Owner's Manual

ManualsBrandsCRUX ManualsBluetooth Car Kits & AdaptersBluetooth® Interface

Table Of Contents

Installation Instructions

- Adds Bluetooth Music streaming to the OEM Toyota radios.

- USB music playback with track up, track down and folder controls from the radio panel or steering

wheel controls.

- Adds 3.5mm auxiliary audio input.

- Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.

- USB port on the module can also be used to charge your phone.

- Magnetic phone mount included.

TOYOTA

4 Runner

1998-2002

Avalon

1998-2002

Camry

1998-2004

Camry Solara

1999-2003

Celica

1998-2002

Corolla

1998-2004

Highlander

2001-2003

Land Cruiser

1998-2001

MR2

1998-2004

Rav4

1998-2011

Sequoia

2000-2002

Sienna

1998-2002

Tacoma

1998-2004

Tundra

2000-2002

1. Radio must have a 12-pin (5 + 7) CD changer port.

2. The BTS-TY1 replaces the CD changer if present.

3. NOT compatible with ‘AD’ Series radios. (ex. AD6806)

Rev.110916

1/2

Navigations Apps

iPod, USB flash drive

and 3.5mm cable not

included.

Summary of content (2 pages)

PAGE 1
- Adds Bluetooth Music streaming to the OEM Toyota radios. USB music playback with track up, track down and folder controls from the radio panel or steering wheel controls. Adds 3.5mm auxiliary audio input. Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode. USB port on the module can also be used to charge your phone. Magnetic phone mount included. TOYOTA 1. 2. 3.
PAGE 2
1. Carefully remove the radio to gain access to the radio connectors. 2. Locate the 12-pin (5 + 7) CD changer port. If there is a connector plugged into this cavity, you need to unplug it. The BTS-TY1 replaces the CD changer. 3. Plug the 12-pin connector of the BTS-TY1 to the CD changer port of the radio. 4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-TY1 module and run towards the desired location. 5.