User Manual

Quick Reference Guide
This quick reference guide refers to Mojo XT organ only and is not
applicable to standard Mojo organ.
If you wish to access to the full set of functions, we suggest to buy our
Mojoeditor, a simple and interesting device that allows you to modify and
edit a lot of settings of your organ sound.
Thank you for purchasing the new Crumar Mojo XT. Mojo XT is an evolution of the famous Mojo organ
adding some new features.
1. Internal power supply.
2. 11 pin connector for rotary speaker.
3. Advanced midi features.
4. Integrated connection for Mojoeditor.
This short guide will serve you as a quick reference for the basic operations. For more details, please visit
www.crumar.it.
CONNECTIONS AND STARTUP - Make all necessary AUDIO and MIDI connections prior to turning the
instrument on. Use only AC power cord supplied with the instrument. Connect the L/R Audio outputs to your
speakers, the 11 pin cable to your rotary cabinet (if available) or your headphones, then press the POWER
button once. Wait until the led will stop the presentation and you are ready to go! By default, the organ will
startup in manual drawbars mode.
PRESETS - The presets numbered from 1 to 6 are user presets and don't take the drawbars position into
consideration.
If you want to use the drawbars, press the preset buttons labeled “A-hold-B”
. To save a
preset, press the desired numbered button for about 2/3 seconds, the corresponding LED will turn off and
then on again. The functionality of upper set and lower set is the same.

Summary of content (4 pages)