User Manual

18. THE USB PORTS
The Mojo 61 includes a Type-A “host” USB 2.0 port. This is
mainly used for updating the software in case a new
release is available.
Another interesting use for this port is the possibility to
connect a “Class-compliant USB-MIDI device”, i.e. one of
the many MIDI devices that don't need special drivers
when they are connected to a computer. The Mojo 61 will recognize USB-MIDI
devices and will use them along with any other MIDI equipment connected to either
one or both the classic MIDI inputs located on the rear panel. This way you can
connect up to 3 MIDI devices that send messages to the Mojo 61, for example a
keyboard, a pedalboard and a control surface. Please avoid connecting unsupported
devices to this port. Please note that this port can supply a max of 250 mA of current.
Don't use this port to charge mobile devices.
An additional Type-B USB 2.0 port is present at the back side of the
Mojo 61 that provides Class-compliant USB-MIDI IN/OUT
connection to your computer. Use this port to connect the Mojo
61 to your computer software. No drivers are needed for Windows,
OS X and Linux.
CRUMAR MOJO 61 USER'S MANUAL - Page 24/28