User Manual

17. SHORTCUTS
Some of the functions that are normally accessed from the Editor web-app can also
be accessed using key-combinations on the command panel. Here's a summary:
– Switch between the two Combo Organ sounds: use UPPER PRESET A for
Combo Type “F” and UPPER PRESET B for Combo Type “V”.
– Switch between the four Piano sounds: use UPPER PRESET A for Tine Piano and
UPPER PRESET B for Reed Piano; use LOWER PRESET A for Clavi Piano and
LOWER PRESET B for Acoustic Piano.
– Switch between Square, Triangle and Mono Tremolo: press & hold the multi-
function button n. 20 labeled “FX1”, the effect turns off for a short while then
turns on again with the new setting.
– Switch between Phaser and Chorus: press & hold the multi-function button n.
21 labeled “FX2”, the effect turns off for a short while then turns on again with
the new setting.
– Set the split point: press SHIFT + MODE button n. 15, the Split LED starts
blinking, now play the desired split note on the keyboard (you won't hear any
sound), the LED restores its previous position and the split point is now set and
saved.
– Reset the transposition: press SHIFT + press & hold either button n. 18 or n. 19,
the transpose LED n. 23 should turn off and the transpose amount is now
zeroed.
– When playing VB3, it is possible to toggle the Chorus/Vibrato effect on the
other manual by pressing SHIFT + button n. 7, i.e. if the upper manual is
selected, using this shortcut, the effect is toggled on the lower manual.
CRUMAR MOJO 61 USER'S MANUAL - Page 23/28