User Manual

9
• Vibrato Section: consists of 3 buttons and 6 leds near the button of vibrato/chorus.
With these 3 buttons is possible to add vibrato or chorus effect to sound and control
it. “Vibrato Up” button enable effect only on upper manual, “Vibrato Lo” enable effect
only on lower manual. With “Vi/Cho” button you can choose the type of effect C3 –
V1 – C1 – V2 – C2 – V3 (related led will turn on).
• Percussion section: this section has four buttons. With these buttons is it possible
to add percussion effect to sound and control it. Effect only acts on upper manual.
“percussion on” button enable or disable percussion, “soft” button change the
volume of percussion, “fast” button selects type of decay fast or slow, “3°” button
selects the harmonics.
• Pedal to Lower button: with this button you can choose to play the classic tone of
the pedal with the lower manual without the use of bass pedals: the sound of the
lower manual will be lower and deeper. In order to control the sound, you can use
the two central drawbars. When this feature is disabled (led off) the lower manual
will behave in normal way and the typical sound of the pedals will be executed only
if a pedalboard is connected to the instrument via the Midi in connector.
• Shift button: pressing this button, the instrument enters edit or programming mode:
related led will blink slow and “pedal to lower” led will blink fast (to use this
function, see section “programming”).
• Drawbars section: Mojo has 20 drawbars arranged into two sections of 9 and a
central section of 2. First section (or left set) refers to upper manual, second section
(or right set) refers to lower manual, central section (or pedalboard set) is used to
control the sound of the pedal. The two sets, upper and lower, are composed of 9
drawbars in the following colors:
brown: 16’ – 5e1/3
white : 8’ – 4’ – 2’ – 1’
black: 2&2/3 – 1&1/3 – 1&3/5
with these, you can mix harmonics and set the volume on each from min. of 0
(closed drawbars) to max. of 8 (drawbar fully opened).