User Manual

4
When you are using the instrument, please be aware of the following:
• If present, ventilation holes must not be covered.
• Air must circulate freely around instrument
• The instrument must be installed in a place free of vibration.
• Do not expose it to electro-magnetic interference
• Do not expose it to heat, cold, wet and dust.
• Do not expose it to direct sunlight.
• Do not expose it to electrostatic forces.
• Do not place on it things with flames like candles etc…
• Do not place on it vessels containing fluids.
If anything enters the instrument, please contact your dealer or the official CRUMAR
service support.
N.B.
1. Do not unplug the power cord by forcing the cable.
2. When not in use, please unplug the AC cable from the AC main.
3. Please unplug the AC cable during thunderstorms.
WHEN THE INSTRUMENT IS CONNECTED TO THE AC MAIN AND THE POWER
SUPPLY IS CONNECTED TO THE INSTRUMENT, PRESSING THE “POWER”
BUTTON, WILL CAUSE THE INSTRUMENT TO POWER ON: POWER BUTTON WILL
LIGHT AND THE BOOT SEQUENCE WILL START (YOU CAN SEE THE BOOT
SEQUENCE LEDS).