User Manual

15
simulation with 800 Hz internal crossover and then placing the two spakers on top of each
other, the simulation will be “monoaural”, but will reflect the physics of rotary amplifiers with
bass on bottom and treble on top, whereas the control is “OFF, the rotary speaker
simulation will work in common stereo way.
Finally, the red button “store”, stores the changes made and makes them “default” at
every boot of the instrument; it is important to remember that if the filter “EWF” is
enabled, by pressing “store”, changes will not be recognized on next boot of Mojo
because “EWF” will filter the selections; To make permanent changes, it is
necessary that “EWF” filter is disabled through the “disable”, “commit changes” or
“commit and disable – live” functions.
The principles of working of Mojo is therefore expected that user can modify the sound
through the various options offered by VB3 HE II software and acting first on “store” and
then on “EWF” makes permanent changes to instrument to ensure that it will always boot
with configuration changed at will: it is obviously possible to change them later, when you
want. Many parameters of the software described above can be changed during
performance without the need to interface the screen and the mouse and without access to
VB3 HE II user interface; in this case you have to use the “shift” button, very useful in the
case you won’t your modifications to be permanent, for example if you think they are
responding only to a temporary necessity. The most relevant example is the
activation/deactivation of “Out Split”: according to amplification system you are planning to
use in a particular situation, may be necessary to enable or disable this feature but without
made this modification permanent.