User Manual

13
RE-ENABLING “EWF”.
Do the same as on point 1, 2 & 3.
4) click on “enable ewf” and confirm all messages: instrument will reboot.
5) After that, filter will be enabled.
“COMMIT CHANGES” FUNCTION.
With this function, as option present in the “EWF Manager”, when “EWF” is enabled, you
can save changes “on the fly” without the need to disable the filter. This feature can be
useful in case of “light changes” such as modifications of settings of the VB3 HE II (eg.
changing the type of tonewheel generator or type of rotary speaker simulation).
Open “EWF Manager” and click on “commit changes”. All the changes made so far, will
be immediately saved in the flash support without rebooting the instrument; filter will then
automatically re-enabled.
“COMMITANDDISABLE –LIVE” FUNCTION.
With this function, when “EWF” is enabled, you can immeditely save your changes and
disable “EWF” in one single operation. To use it: make the necessary customizations,
open “EWF Manager” and select “commitanddisable –live”. All changes will be
permanently recorded on flash support and “EWF” will be disabled. When finished, it is
recommended to re-enable “EWF”.
Crumar Mojo is factory set with VB3 HE II that autostart whenever you turn the instrument
on: VB3 HE II actually is the most advanced electromagnetic organ emulation software
and it offers significant advanced features to change the sound and timbre. From the
control panel of MOJO you can use and modify all the parameters of the software without
necessarily using the graphical interface, the mouse and the screen; however, we suggest
to study the software in order to understand fully the potential and the functionality.
The graphical interface in Fig. 3 shows the main screen of the software.