User Manual

10
From left to right each set is composed by:
Pedalboard drawbars
In the middle of the 2 drawbars sets, there are two brown drawbars used for control
32’ and 16’ when a midi pedalboard is connected to the instrument or when pedal to
lower function is active.
• Control knobs: In the left part of the instrument under “cabinet” section, there are 6
knobs used for control other parameters of the sound:
1. Volume: Main volume of the instrument.
2. Drive: control for the tube overdrive.
3. Click: control for the keyclick simulation.
4. Reverb: control for regulate the depth of the spring reverb simulation.
5. Bass: tone control for bass.
6. Treble: tone control for treble.
16’ One octave under 8’ with repetition of first low octave.
5-1/3 A fifth above 8’
8’ Fundamental
4’ An octave above 8’
2-2/3 An octave and a fifth above 8’
2 Two ocatve above 8’ with repetition of the last upper octave.
1-1/3 Two octave and a third above 8’
1-3/5 Two octave and a fifth above 8’
1 Three octave above 8’ with repetition of the two last upper
octaves.