User Manual
2.5 – UPPER PRESET
Crumar Mojo offers two presets for each manual, plus the CANCEL position, the
HOLD function, and of course the manual drawbar mode.
PLEASE NOTE: Presets will only store the drawbar position, and nothing else. Also, when
a preset is active, the percussion is turned off on the upper manual. This behavior reflects
exactly what happens on the real tonewheel organs, with just a few changes.
– To select a preset, just push the desired button A or B;
– To use the live drawbars, push the MANUAL button;
– To store a preset: once you've set the drawbars to the position you wish to
store, push and hold one of the two preset buttons, A or B, for about 2 seconds
until the light goes off and on again.
The HOLD mode will let you prepare an alternate drawbar registration while holding
the current registration active. When the MANUAL button is active, press the
MANUAL button again, it will start blinking. While it's blinking, move the drawbars to
prepare your alternate registration, you'll notice that the sound will not reflect the
changes you're applying to the drawbar registration. Once done, press the MANUAL
button again to apply the change. The light will stop blinking.
The CANCEL mode will turn the whole manual off while enabling the note
transmission on the MIDI output ports. To enable the CANCEL mode, push and hold
the MANUAL button until the light goes off. To resume from the CANCEL mode, push
the MANUAL button or one of the A or B preset buttons.
2.6 – LOWER PRESETS
Lower presets work exactly like for the upper section, with the only exception that
you have no percussion on the lower manual, so selecting a preset will not turn the
percussion off.
CRUMAR MOJO CLASSIC USER'S MANUAL - Page 8/20