User Manual

Crumar Seven User s Manual '
10.1. EDITOR HOMEPAGE, GLOBAL OPTIONS.
The first page of the editor is dedicated to some global settings and operations such as the
firmware update and factory reset.
The settings are:
 Tuning: This accepts a range from A=430 Hz to A=450 Hz, with 440 Hz being the
default value. Every time this setting is changed, a reboot is required in order for the
new change to take effect.
 Channel: the MIDI channel used for sending and receiving all messages. If incoming
messages are on a different channel, they'll be ignored.
 Alt. Channel: this is the alternative Channel that can be used only when the
instrument is set in Local-off mode and is only for sending messages.
 Send CC: select YES to send all CC messages whenever a control is changed on the
panel or in the editor; select NO to avoid sending CC messages.
 Send PC: select YES to send Program Change messages whenever a new preset is recalled; select NO to avoid sending them.
 Sustain Pol.: Select N.C. for Normally Closed pedals, and N.O. for Normally Open pedals. This parameter can also be changed by
pressing and holding for 3 seconds the BANK button on the instrument panel.
Crumar Seven User's Manual - Page 22